About Motor:

1.Model:MOTOR MY1020

2.Motor Type:High-Speed BLDC brushless DC Motor

3.Current:42A

4.Out put /W:3000W

5.Rated Speed:4900rpm/min

6.Weight:4.7KGS

7.Diameter:95mm

8.Rated Torque/N.m:5.4N.m

9.Applicable:Electric Scooter,Ebike,Folding Bike,Small E-Moto,machine,MIni Electric Car ,DIY kit

10Installation: Center,MID DRIVE

11.Application Chain:T8F Sprockt /Chain

About Controller:

36V-84V 2000W-3000W all can work brushless controller

Name: Intelligent dual-mode brushless controller

Rated Voltage: 36V-84V

Low Voltage : 32V

Rated Power: 2000W-3000W

Limit Current: 60A

Number of brushless controller tube：18

Weight：1000g

Brushless controller function：

1.low level brake

2.speed control handle（throttle）

3.cruise

4.hall

5.reverse gear

6.PAS

7.high level brake

8.intelligent recognition（self-learning）

9.phase meter

10.hall meter

11.three speed gear

12.electric door lock（must connect）

13.anti-theft alarm signal（is connect to alarm，if not have alarm，not need connect）

14.anti-theft alarm power（is connect to alarm，if not have alarm，not need connect）

15.multiple data meter

16.motor phase line

17.battery

How to connect controller？

1.connect the motor phase line(color to color）

2. connect the battery line(red:battery+ , black:battery-)

3. connect the controller throttle to throttle and need color to color connect,

connect controller electric door lock to throttle electric door lock

（if throttle not have electric door lock, controller electric door lock docking,

so controller electric door must connect ）

4. connect the hall line(if motor without hall line, don't need connect)

5.docking the two self-learning lines, the wheel will forward or reverse.

(1.if wheel forward ,Separate the self-learning line.

2.if wheel reverse, Separate the self-learning line. Docking the self-learning line again

if wheel forward ,Separate the self-learning line.)

6.other functions can be connected as needed.

Note: We can not provide Installation guide, we can provide motor and controller wire diagram ONLY!( below have wire diagram ,for reference only)