Nvarcher HIFI DAC Decodificador Raspberry Pi Coaxial Fibra Óptica I2S Placa de Som Digital 384KHz 32Bit
528+ sold
€41.71€52.80
21% OFFBuy on AliExpress
You will be redirected to AliExpress to complete your purchase
Specifications
- Brand Name
- Nvarcher
- High-concerned chemical
- None
- Maximum Power Per Channel
- NO POWER
- Origin
- Mainland China
- Package
- No
- Certification
- NONE
- Model Number
- Broadcast Board
Product Description
Introduction of Raspberry Pi Digital Output Board
Analog audio: RCA/headphone 32K-384K/32Bit
Frequency response bandwidth 20-20KHz
Output level 2Vrms
Signal to Noise Ratio (SNR) 120dB
Coaxial: PCM 32K-192K/24Bit
DOP DOP64
Fiber optic: PCM 32K-192K/24Bit
DOP DOP64
I2S:PCM 32K-384K/32Bit
DOP DOP64/DOP128
DSD DSD64/DSD128
Frequency response bandwidth 20-20KHz
Output level 2Vrms
Signal to Noise Ratio (SNR) 120dB
Coaxial: PCM 32K-192K/24Bit
DOP DOP64
Fiber optic: PCM 32K-192K/24Bit
DOP DOP64
I2S:PCM 32K-384K/32Bit
DOP DOP64/DOP128
DSD DSD64/DSD128
Product specification
Rated voltage: +5V (can be powered by the Raspberry Pi motherboard or from the DC socket on the motherboard
Rated current: 300mA
Motherboard size: 56mmx65mm
PCB material: 4-layer green military fiberglass board
Production process: lead-free
Support Raspberry Pi model: Raspberry Pi 2B/3B/3B+/4B
Supported players: Volumia, Moode, RuneAudio,piCorePlayer.
DAC parameter setting introduction:
IN: I2S/DSD/SPDIF settings select DAC decoding board I2S, DSD, coaxial (coaxial) three input sources
I2S: 3-L/4-L setting 3-wire I2S (without MCLK) or 4-wire I2S (with MCLK), Raspberry Pi 2B/3B/3B+needs to be set to 3-L; The Raspberry Pi 4B can be set to 3-L or 4-L (with MCLK master clock required)
MCLK: aut/128/256/512. When the I2S setting is set to 3-L, set the multiple relationship between the recovery system master clock (MCLK) and the sampling rate FS. Aut is in automatic multiple mode, with 256FS below 192K and 128FS
BIT above 192K: 16R/24B/24R/24L/32B. When the IN setting is I2S, set the bit depth of I2S input/output, where L/R represents left aligned/right aligned format and B is the standard I2S format. (Note: The input and output formats of I2S are consistent.)
1B:When the IN setting is set to DSD, the bit depth of DSD is set to 1B and cannot be changed
16R/24B/24R/24L:When the IN setting is SPDIF, set the bit depth and format of I2S output for 16R/24B/24R/24L
FLT: 1/2/3/4/5 Set the filter type used internally in the PCM5122 DAC decoding chip to switch between different timbres
SPDF: turn on/off coaxial interface output function
RCA: Turn on/off the analog audio interface output function
OPT: out/off Enable or disable fiber optic interface output function
I2S: turn on or off HDMI interface I2S or DSD output function
I2S: 3-L/4-L setting 3-wire I2S (without MCLK) or 4-wire I2S (with MCLK), Raspberry Pi 2B/3B/3B+needs to be set to 3-L; The Raspberry Pi 4B can be set to 3-L or 4-L (with MCLK master clock required)
MCLK: aut/128/256/512. When the I2S setting is set to 3-L, set the multiple relationship between the recovery system master clock (MCLK) and the sampling rate FS. Aut is in automatic multiple mode, with 256FS below 192K and 128FS
BIT above 192K: 16R/24B/24R/24L/32B. When the IN setting is I2S, set the bit depth of I2S input/output, where L/R represents left aligned/right aligned format and B is the standard I2S format. (Note: The input and output formats of I2S are consistent.)
1B:When the IN setting is set to DSD, the bit depth of DSD is set to 1B and cannot be changed
16R/24B/24R/24L:When the IN setting is SPDIF, set the bit depth and format of I2S output for 16R/24B/24R/24L
FLT: 1/2/3/4/5 Set the filter type used internally in the PCM5122 DAC decoding chip to switch between different timbres
SPDF: turn on/off coaxial interface output function
RCA: Turn on/off the analog audio interface output function
OPT: out/off Enable or disable fiber optic interface output function
I2S: turn on or off HDMI interface I2S or DSD output function
Product information last updated on February 9, 2026