
Toolkitrc m7 200w 10a dc carregador de equilíbrio descarregador para 1-6s bateria lipo com tensão servo verificador esc testador receptor lcd ips
You will be redirected to AliExpress to complete your purchase
Specifications
- Brand Name
- ToolKitRc
- High-concerned chemical
- None
- Is Electric
- No Battery
- Is it battery/power supply
- N
- Is it charger/adapter
- Y
- Origin
- Mainland China
- Material
- Plastic
- Plastic Type
- ABS
- Recommend Age
- 14+y
- Use
- Vehicles & Remote Control Toys
- Certification
- CE, FCC, RoHS
- Is Batteries Included
- No
- Remote Control Peripherals/Devices
- Battery Charging Units
- Quantity
- 1 pcs
- Model Number
- M7
- Choice
- yes
Product Description
M7 is a multifunctional tool chain product that integrates functions such as a balanced charger and discharger, an electric display, a signal measuring device, and a signal source.
M7 SPECS:
Product size: 73*51*27 mm
Product weight: 90g
Pack size: 84*79*39 mm
Pack weight: 150g
LCD: IPS 2.0inch LCD 320*240 Pixel
Input voltage: 7.0-28.0V @MAX 12A
Type of battery: Lipo LiHV LiFe Lion@1-6
NiMh @1-16S Pb @1-10S
Balance current: 400mA @2-6S
Charger power: 200W @MAX 10A
Discharge power: 200W @MAX 10A Recycle mode
10W@3A Normal mode
USB: 2.1A @5.0V or Upgrade
Input:
PWM: 880-2200us @20-400Hz
PPM: 880-2200us*8CH @20-50Hz
SBUS: 880-2200us*16CH @20-100Hz
Voltage: 1.0-5.0V @1-6S
Internal resistance: 1-99mR @1-6S
ESC: 200W@10A PWM Output
Output:
PWM: 500-2500us @20-1000Hz
PPM: 880-2200us*8CH @20-50Hz
SBUS: 880-2200us*16CH @20-100Hz
Power supply: 1.0-28.0V @1.0-10A mode:CC+CV
OverCurrent Cutoff time: <5ms
Packaging included:
1X ToolkitRC M7 Charger
Note: After the M7 charger is powered on, it will display a voltage of 0.12V in an unloaded state, which is normal and does not affect use. If the voltage displayed is inaccurate after connecting your battery, you can use a multimeter to measure the battery voltage, record it on paper, and then enter the voltage calibration page of the M7 charger to manually calibrate the voltage.
Product description
M7 is a multifunctional tool chain product that
integrates functions such as a balanced charger and
discharger , an electric display, a signal measuring device,
and a signal source.
Can charge and discharge and balance
management of LiPo, LiHV, LiFe Lion 1-6S, NiMh
1-16S, PB 1-10S batteries
Charge current:MAX 10A @MAX200W
Discharge current:
Recycle mode Max 10A@200W
External mode Max 10A @200W
Inter mode Max 3A @10W
Lithium battery cut-off voltage can be set (TVC
function)
Can measure battery voltage, battery internal
resistance, lithium battery balance management
Can measure the signal value of PWM/PPM/SBUS,
with an accuracy of 1 microsecond
Can output PWM/PPM/SBUS standard signals with
an accuracy of 1 microsecond@ToolkiRC 2021 7
Constant current and constant voltage source
output, customizable 1-28V constant voltage, 1-10A
constant current
Can be adapted to mainstream drone batteries,
automatically activated and charged
Multi-language system, you can upgrade any
language you need
USB 2.1A@5.0V output, rechargeable mobile
devices
The device is simulated as a U disk, and the
upgrade file is copied to realize the product
firmware upgradeOther functions
1. Firmware upgrade
After connecting the M7 to the computer with the USB data cable in the box, the computer will recognize a U
disk named T oolkit. Download the upgrade file app.upg
on the official website and overwrite the files in the U
disk to upgrade the firmware.
2. USB 5.0V output
In addition to the above upgrade functions, the USB
interface can also output 2.0A current to charge mobile
devices.
3. Automatically continue charging and discharging
When a battery is fully charged, after unplugging the
battery for 2 seconds, connect to the next battery, the
device will automatically continue to charge and
discharge, you can start and stop this function in the
settings menu
4. Fan level
When the internal temperature of the device exceeds
45°C, the fan turns on half-speed air volume to reduce
noise. When the internal temperature exceeds 53°C, the
fan turns on full-speed air volume to enhance heat
dissipation.
6. Manually calibrate the voltage
In the shutdown state, press and hold the [roller]
without releasing, connect the power supply, and the
system will enter the manual voltage calibration function.
Use a voltmeter to measure the actual voltage of each
battery, move the cursor to the corresponding voltage
value, modify the voltage value to be consistent with the@ToolkiRC 2021 44
voltmeter value, and achieve calibration. After the
calibration is completed, move the cursor to save, short
press once, the buzzer will beep once, the save is
successful. Just exit or shut down
7, fully charged
When the lithium battery is fully charged, it will
prompt "Fast charge is done". If the battery is not
removed, the constant voltage trickle charge will be
performed automatically to make the battery reach a
more full state.
Warning:
【EN】WARNING: CHOKING HAZARD - Small parts. Not for Children under 3 years.
【FR】AVERTISSEMENT: RISQUES D'ÉTOUFFEMENT - Pièces de petites dimensions. Ne convient pas aux enfants de moins de 3 ans.
【ES】ADVERTENCIA: PELIGRO DE ASFIXIA: Piezas pequeñas. No apto para niños menores de 3 años.
【DE】WARNUNG: ERSTICKUNGSGEFAHR – Kleine Teile. Nicht für Kinder unter 3 Jahren.
【IT】AVVERTENZA: PERICOLO DI SOFFOCAMENTO-Piccole parti. Non adatto ai bambini sotto i 3 anni.
【PL】OSTRZEŻENIE: RYZYKO ZADŁAWIENIA SIĘ – Małe części. Nieprzeznaczone dla dzieci w wieku poniżej 3 lat.
Pros & Cons
Pros
- Função multifuncional, integrando carregador, descarregador, verificador de servo e testador de receptor.
- Tem display LCD IPS de 2,0 polegadas, facilitando a visualização das configurações e dados da bateria.
- Possui certificações CE, FCC e RoHS, garantindo segurança no uso.
- Tem potência de 200w e corrente de 10a, permitindo carregar baterias de forma rápida.
Cons
- Não inclui baterias para o funcionamento do produto.
- O tamanho compacto pode dificultar a manipulação em ambientes com pouca luz.
- Não há informações sobre suporte em português para o produto.
- O peso do pacote é de 150g, o que pode aumentar o custo de envio para compras internacionais.
Common Questions
Para quais tipos de baterias esse carregador é compatível?
Ele é compatível com baterias lipo de 1 a 6s, conforme as especificações do produto.
De que material é feito o carregador?
O carregador é confeccionado em ABS, um tipo de plástico resistente, conforme as especificações.
Esse carregador tem funções além de carregar e descarregar baterias lipo?
Sim, ele também funciona como verificador de tensão de servo, testador de receptor e tem display LCD IPS de 2,0 polegadas.
Quais as dimensões do produto?
O produto tem dimensões de 73*51*27 mm, e o pacote tem 84*79*39 mm, conforme as descrições.
O produto é enviado com certificações de segurança?
Sim, o carregador tem certificações CE, FCC e RoHS, conforme as especificações do anúncio.
Product information last updated on November 20, 2025
