Modelo de pico bomba de engrenagem de metal elétrica bomba de reabastecimento bomba de fumaça cnc invólucro de metal bomba de óleo elétrica

Model gasoline engine all metal CNC high-end refueling pump CNC metal gear refueling pump refueling pump

The smoke pump adopts a high-voltage motor that can supply 4-12V power

Direction: Switching between forward and reverse rotation

Size: 115mm in length and 30mm in diameter

Oil nozzle: diameter 4mm

Voltage: 4-12V (available with 3S battery)

Plug: XT60

Flow rate: 800m1 per minute

Lift: 1.5 meters

Weight: 130 grams

Features:

1. All metal gear pump with long service life

2. Fully enclosed design for safer oil pumping

3. Built in voltage stabilizing power supply protection module to protect the motor

4. Waterproof three-stage switch with forward and reverse design, capable of pumping and pumping 5 wide voltage inputs 4-12V input, T-plug XT60 plug optional

6. Adopting polyurethane sealing ring, universal for gasoline, methanol, and diesel

matters needing attention:

1. Gear pump is a precision instrument, and any small impurity in the gear during high-speed operation may cause the oil pump to malfunction,

Therefore, when pumping oil, please ensure that the oil is clean and free of impurities, or install an oil filter on the oil pipe. 2. Do not idle for a long time or pump oil with high temperature,

To avoid oil leakage caused by accelerated aging of the sealing ring

3. Do not disassemble the oil pump without permission. Any improper operation during disassembly and reassembly will create gaps and cause air leakage, which will prevent the oil from being pumped