Professional Front Parking Sensor Kit Prefix Concealed Built-in Flat Parktronic Assistant System Not Reversing Backup Radar
You will be redirected to AliExpress to complete your purchase
Specifications
- Brand Name
- QXNY
- High-concerned chemical
- None
- Type
- Invisible
- Origin
- Mainland China
- Material
- ABS
- Certification
- CE, FCC
- Model Name
- Front parking sensor
- Talk Range
- Front: 0.3M ~ 0.8M
- Choice
- yes
Product Description
1: Professional car front parking sensors.
2: In the cab, you can't see the product. When it is working, you can hear the sound of the alarm!
3: The built-in flat sensor is very nice-looking, just like the original part of the car.
Many luxury cars use this type of product
Installation diagram
White-----brake light positive
Black-----GND
Red ------ ACC+
Two conditions for the operation of front-end radar
1: When braking
2: When the sensor detects an obstacle
What is the difference between front radar and rear radar?
Difference 1:
The professional front radar can still work for about 10 seconds after power failure.
For example, the driver activated the front radar at position 1, and when car reached position A, the car's speed was already slow. At this point, the driver will no longer brake, and the power to the radar will be disconnected. However, the product will continue to operate for about 10 seconds to detect and alarm at locations B and C.
Difference 2:
A professional front-end radar should have a detection range of around 1 meter, as the driver can clearly see obstacles beyond 1 meter
As shown in the following figure: When waiting for a red light, if a useless alarm is generated due to the detection distance being too far, it may sound annoying
Professional front radar VS rear radar
Smart start
When braking, if the obstacles are not activated, the user-friendly design avoids the troubles caused by the endless starting system.
Product parameters
1>Detection range: 0.3M~1M
2>Rate voltage: 12V DC
3>Rate operating range: 10.5V - 16V DC
4>Rate current: 100mA - 300mA
5>Ultrasonic frequency: 40KHz
6>Control moudle working temperature: -30 - 80 celcius degree
7>Display working temperature: -20 - 70 celcius degree
8>Sensor diameter: 16.5mm
9>Installation mode: Drilling
A:High volume
B:Medium volume
C:Mute
Pros & Cons
Pros
- Concealed flat sensor design that blends in with the vehicle's exterior
- Provides accurate obstacle detection between 0.3M ~ 0.8M for safe front parking
- Made from durable ABS plastic for long-lasting use
- CE and FCC certified for safety and quality
Cons
- Only a front-only parking system, no rear sensors included
- No specific vehicle make/model compatibility listed, so buyers must verify fit for their exact car
- No installation hardware or instructions included in the kit
- Detection zone is limited to 0.3-0.8M, smaller than some higher-end parking systems
Common Questions
What material is this front parking sensor kit made from?
The sensors and system components are made from high-quality ABS plastic for durability.
Which vehicles is this parking sensor kit compatible with?
It is a universal front parking assistant system suitable for most passenger vehicles, with a concealed flat design that matches factory vehicle styling.
How does this front parking sensor kit work?
It detects obstacles between 0.3M ~ 0.8M in front of the vehicle, and emits an audible alarm in the cab to alert the driver during parking.
What are the key features of this parking sensor kit?
It has a concealed, flat built-in sensor design that looks like original factory parts, and the alarm sound is only audible inside the cab.
Where does this parking sensor kit ship from?
This product originates from Mainland China.
Product information last updated on December 28, 2025