High Torque Wheelbarrow 24v 36v 48v 350w 500w Electric Brushless Motor Kit 14.5inch Off-Road Tires

14.5" Electric Wheelbarrow Gear Motor 24V 36V 48V 350W 500W All Terrain Electric Wheelbarrow kit Fat Off road Rough Tyre

Note:

All the shipping way won't allow the item with gas go to there aircraft. So all the wheels are without gas to arrive to you. When you get it, please inflate the wheel firstly.

This high torque geared hub motor is specially for wheelbarrow or scooter running on dirty road like grass, sand, soil, water covered road with high perfermence and good climbing capacity.

Packing List:

1.1pcs gear hub motor wheel with tyre

2.1 pair of brake

3.1 pcs brushless controller(24V/36V/48V 350W,36V/48V 500W)

4.1 pair LCD throttle

About the geared motor power design 350W,500W

About the load, standard 150kg, max 250kg

About the speed,

24V 250W, 24V 350W Walking speed(5-20km/h)，36V-48V 350W about 15-30km/h ，36V 500W ,48V 500W about 20-40km/h.

About the operation, easy and comfortable.

High Torque 30-40 N.m

The tire is 350mm high, 120mm wide, 125mm open gear and 14mm shaft diameter

24/36V/48V/60V 250-350W 10A-20A brushless gold controller function:

1.low level brake

2.cruise

3.brake light power

4.PAS(pedal assist)

5.reverse gear

6.high level brake

7.speed controller handle（throttle）

8.phase meter

9.three speed gear

10.hall meter

11.hall

12.intelligent recognition（self-learning lines）

13.head/tail light

14.electric door lock

15.phase line

16.battery

how to connect ？

1.connect the motor line (color to color）

2. connect the battery line(red wire :battery + , black:battery-)

3. connect the controller throttle line（color to color），connect electric lock

（if your throttle not have electric lock，controller electric lock can be shorted）

4. connect the hall line(if motor without hall line, don't need connect)

5.docking the two self-learning lines, the wheel will forward or reverse.

(1.if wheel forward ,Separate the self-learning line.

2.if wheel reverse, Separate the self-learning line. Docking the self-learning line again，

if wheel forward ,Separate the self-learning line.)

6.other functions can be connected as needed.

intelligent brushless sine wave controller for electric bike/electric scooter/brushless motor

voltage：24V/36V/48V/52V universal

current：10A-20A

rated power：250W-350W all can work

1.phase meter

2.cruise

3.PAS（pedal assist）

4.throttle（speed control）

5.reverse

6.hall meter

7.hall wire

8.self-learning line

9.3-speed

10.brake light

11.Headlights, tail lights

12.low level brake

13.key lock

14.battery

15.phase line

how to connect ？

1.connect the phase line (color to color）

2. connect the battery line(red wire :battery + , black:battery-)

3. connect the controller throttle line（color to color），connect electric lock

（if your throttle not have electric lock，controller electric lock can be shorted）

4. connect the hall line(if motor without hall line, don't need connect)

5.docking the two self-learning lines, the wheel will forward or reverse.

(1.if wheel forward ,Separate the self-learning line.

2.if wheel reverse, Separate the self-learning line. Docking the self-learning line again，if wheel forward ,Separate the self-learning line.)

6.other functions can be connected as needed.

36V-48V 350W controller can work with hall sensor/hall sensorless

Rated Voltage: 36V/48V

Low Voltage : 30V/39V±0.5V

Rated Power: 350W

Limit Current: 15A

Phase Angle: Universal for 60° and 120°

Main functions: three-speed, cruise, 1:1 assist

1.self-learning

2.low brake(electric brake）

3.throttle

4.cruise

5.hall

6.3-speed

7.PAS（pedal assist）

8.anti-theft power supply

9.anti-theft signal

10.headlights

11.electric lock

12.motor

13.battery（red：battery+，black：battery-）

14.pointer meter

how to connect ？

1.connect the motor line (color to color）

2. connect the battery line(red wires :battery + , black:battery-)

3. connect the controller throttle line（color to color），connect electric lock

（if your throttle not have electric lock，controller electric lock can be shorted）

4. connect the hall line(if motor without hall line, don't need connect)

5.docking the two self-learning lines, the wheel will forward or reverse.

(1.if wheel forward ,Separate the self-learning line.

2.if wheel reverse, Separate the self-learning line. Docking the self-learning line again，if wheel forward ,Separate the self-learning line.)

6.other functions can be connected as needed.

36V-48V 500W controller can work with hall connect sensor or not connect hall sensor

Rated Voltage: 36V/48V

Low Voltage : 31V/42V±0.5V

Rated Power: 500W

Limit Current:30A

1.self-learning

2.cruise line

3.reverse line

4.high brake

5.low brake

6.3-speed (low/middle/high)

7.throttle

8.electric lock

9.hall line

10.LCD instrument line

11.Anti-theft power supply

12.Anti-theft signal

13.battery (red battery+, black battery-)

14.motor

15.pointer meter line

1.connect the motor line (color to color，if motor without hall line, don't need connect hall line）

2. connect the battery line(red:battery + , black:battery-)

3. connect the controller throttle line to throttle, controller electric lock connect to throttle electric lock

（if throttle not have electric lock,the electric lock 2 wires of the controller can be docked together）

4.docking the two self-learning lines, the wheel will forward or reverse.

(1.if wheel forward ,Separate the self-learning line.

2.if wheel reverse, Separate the self-learning line. Docking the self-learning line again，

if wheel forward ,Separate the self-learning line.) Self-learning is to adapt to the supply voltage

5.other functions can be connected as needed.