OSOYOO 4.3 Inch IPS RPi5 LCD Capacitive Touch Screen Display 800×480 DSI Interface for Raspberry Pi 5 4 3 2 Model B A

Note: The interface of this screen is different from Raspberry Pi Official 7" DSI screen. Please choose the correct DSI cable for this screen at the bottom of description

• PROFESSIONAL For RASPBERRY PI MONITOR ---- For Raspberry Pi hobbyist could not miss this perfect monitor! Easily mount on Raspberry Pi to the exposed backside. Raspberry adaptor board is built in. Save your space, keep your desktop neat. . As no use GPIO, you can work to your DIY IoT projects when you use this screen at the same time

• EXCELLENT PICTURE PERFORMANCE ---- 4.3 inches TFT colour display monitor with high resolution picture and large viewing screen. Perfect for creating portable. Capacitive Touch Screen, Finger Touch, better touch response, faster response time, 800 x 480 pixel resolution

• DSI CONNECTOR, EASILY ASSEMBLED, PLUG AND PLAY, NO DRIVER NEEDED ---- Free drive support for Raspberry Pi OS, Ubuntu, RetroPie, etc. This drive free monitor designed DSI for signal and data transmission. No need additional power for touchscreen. No program or software support required. You just need to install DSI cable on your screen and Raspberry Pi DSI port, No need of jumper wires then power on Raspberry Pi device which build OS

• SENSITIVITY TOUCH ---- Excellent sensitivity capacitive technology and multitouch capability, you can place it your way to get things done easily (Raspberry Pi OS just supports one point finger touch) Ideal touchscreen monitor for DIY projects! Equipped with reserved fixing holes for control boards - Support Raspberry Pi 5, 2, 3 Model B, 3 B+, 4

• WIDE VIEWING ANGLES ---- IPS Panel 4.3" DSI Capacitive Touch Screen with an expansive 170° viewing angles is ideal for work. It can deliver multiple people in the room a great viewing experience

FEATURE

• Use DSI interface to connect Raspberry Pi board;

• IPS screen

• The refresh frequency is 60HZ;

• Physical resolution is 800*480, 24-bit colour.

• Plug and play. No driver needed.

• Support system with Raspberry Pi OS, Ubuntu, Retropie and so on;

• Support with Raspberry Pi 5/4/3/2;

• Automatically sleep;

How to install 4.3 inch DSI screen

1. Prepare 4.3 inch DSI screen and DSI ribbon cable

2. Toggle DSI interface with your finger

3. Insert the end of cable to DSI interface (Put contact points of cable downward)

4. Fasten DSI interface tightly

5. Install the DSI screen with Raspberry Pi （Pay attention of contact points of Raspberry Pi DSI slot and DSI cable)

Note: if you use the screen with Raspberry Pi 5, Please replace the white DSI cable with black15pin-1mm to 22pin-0.5mm DSI FPC 20cm cable

Value Bundle set:

• 1 piece 4.3" DSI Touch LCD Screen for Raspberry Pi,
  

• 1 pc 15 pin to 15 pin DSI FFC 10cm Cable for Raspberry Pi 2/3/4/ (the metal connectors of two side is at the same side)
  

• 1 pc 15pin-1mm to 22pin-0.5mm DSI FPC 20cm cable for Raspberry Pi 5,
  

• 1 pc screwdriver,
  

• 1 pc user guide manual come in the nice box

(Note: DSI cables for OSOYOO 4.3 inch DSI screen are different from Official Raspberry Pi DSI cable. )