Product Description

DWIN 7.0 Inch TFT LCD Display 800*480 262K Color HMI Smart Screen RS232/TTL Resistive/Capacitive Touch Panel DMG80480T070_05W

Features:

● Based on T5L0 ASIC 7.0 Inch,800xRGBx480,262K Colors, TN screen;

● Touch mode: None touch ,Resistive, Capacitive ;

● TTL and RS232 optional ;

● Support SD card and DGUS tool on-line download ;

● V7.6 DGUS tool for GUI design, Zero code needed;

● Dual Development System: DGUSⅡ/TA(Instruction set);

● Normal View Angle: 70/70/50/70(L/R/U/D);

● Single 8051 chip with dual-core, GUI and Opened OS core. OS core can be programmed by DWIN OS language or Keil C to instead of customer ’MCU .

Display parameters
LCD Type		TN, TFT LCD
Viewing Angle		Normal viewing angle, 70°/70°/50°/70° (L/R/U/D)
Resolution		800×480 pixels (support 0°/90°/180°/270°)
Color		18-bit 6R6G6B
Active Area (A.A.)		154.08mm (W)×85.92mm (H)
Backlight Mode		LED
Backlight Service Life		>30000 hours (Time of the brightness decaying to 50% on the condition of continuous working with the maximum brightness)
Brightness		WTC:250nit WTR:250nit WN:300nit
Brightness Control		0~100 grade (When the brightness is adjusted to 1%~30% of the maximum brightness, flickering may occur and is not recommended to use in this range)

Serial interface parameters
Mode	UART2: ON=TTL/CMOS; OFF=RS232 UART4: ON=TTL/CMOS; OFF=RS232 (Only available after OS configuration)
Voltage Level	Test Condition		Min	Typ	Max	Unit
	Output 1, Iout = -4mA		4.78	5.0	-	V
	Output 0, Iout = 4mA		-	-	0.4	V
	Input 1		2.5	5.0	-	V
	Input 0		-	-	1.0	V
Baud Rate	3150~3225600bps, typical value of 115200bps
Data Format	UART2: N81 UART4: N81/E81/O81/N82 , 4 modes (OS configuration)
Interface Cable	8Pin_2.0mm

Electrical specifications
Rated Power		<5W
Operating Voltage		6~36V, typical value of 12V
Operating Current		210~220mA	VCC=12V, max backlight
		80mA	VCC=12V, backlight off
Recommended power supply: 12V 1A DC

Operating environment
Operating Temperature		-20℃~70℃(12V @ 60% RH)
Storage Temperature		-30℃~80℃
Conformal Coating		Yes
Operating Humidity		10%~90%RH, typical value of 60% RH

Dimensions
Form Factor		WTC:190.50mm (W)×105.41mm (H) ×13.70mm (T) WTR:190.50mm (W)×105.41mm (H)×13.40mm (T) WN:190.50mm (W)×105.41mm (H)×11.9mm (T)
Installation Dimensions		Positioning hole: 166.20 (+0.3mm)×101.50 (+0.3mm)
Net Weight		WTC:268g WTR:255g WN:240g

FAQ

Question 1:

How can I start development with a DWIN LCD Module? Can I assemble it directly on my machine?
Answer:

No, you should update the program to LCD at first, and then assemble it.
Step 1, check the software platform of the screen, it mentioned in datasheet.
Step 2, use the correct development SDK (different platform use different SDK) to finish developing.
Step 3, update software program and test
Step 4, when test OK, assemble it on machine.

Question 2:

What industries are DWIN LCD used in?
Answer:

Beauty machine, Physical therapy, Health and fitness, Medical treatment, Air treatment, Air control, Transportation (Car &ship instruments), instruments and apparatus automation, Electricity, Water treatment, IC design and manufacture, Kitchen appliances (Juicer, oven, ice machine, ice-cream machine, kitchen ventilator), New energy(Photovoltaic, Wind electricity, Charging Pile), Household appliances…

Question 3:

Does DWIN product need a MOQ when purchase?
Answer:

No MOQ for standard product.

Question 4:

Will DWIN have online technical support?
Answer:

Yes,of course, below ways you can get technical support.

- Whatsapp: +86 19192113166
- Customer service email: dwinhmi@dwin.com.cn

- DWIN Developer Forum://forums.dwin-global.com/

- International website://www.dwin-global.com/

- Development tool://www.dwin-global.com/tool-page/

- Development guide://www.dwin-global.com/development-guide/

- DGUS video tutorial://www.dwin-global.com/t5l-dgus-v7-6-video-tutorial/
- Leave messages to us on Aliexpress.

DWIN 7.0 Inch TFT LCD Display 800*480 262K Color HMI Smart Screen RS232/TTL Resistive/Capacitive Touch Panel DMG80480T070_05W

Specifications

Product Description