FPGA Development Board Altera Cyclone EP1C3T144 Core Board with UART MAX232 JTag AS

Development board resources:

1) the main chip: Altera Cyclone series EP1C3T144C8N.

2) 4 independent keys.

3) 4 digital tube: digital tube using transistor drive. Learn the static and dynamic scanning display technology of digital tube. Can do electronic clock, frequency meter, counter and other experiments.

3) 6 LED lights: can do running lights, running lights and other experiments) but also as a state of the display of a device.

4) 8-way dip switches: used to do two or more digital logic circuit experiments.

5) clock: 50MHZ active clock, close to the actual application.

6) infrared receiver IC: can use VS1838 and other receiver head to do infrared receiving experiments, can extend the infrared remote control keyboard.

7) temperature sensor DS18B20 interface: can do thermometer, temperature alarm device.

8) buzzer: can do accompaniment music experiments, alarm sounding and so on.

9) serial port MAX232: This is done for synchronous asynchronous serial communication level conversion, can do synchronous asynchronous serial communication experiments.

10) DS1302 clock module: can be used to develop electronic clocks, perpetual calendars, the user installed batteries can make the clock never stop.

11) LCD interface 16-pin: 16-pin compatible LCD interface, with photometric debugging resistors, can be directly inserted into the character type 1602, dot matrix type 12232, etc..

12) LCD interface 20 pins: 20 pins compatible with LCD interface, with backlight adjustable resistor, can be directly inserted into the dot-matrix type 12864.

13) power supply: the use of multi-group dual power supply LDO module, easy to supply power to each module.

14) FPGA configuration module: high-capacity memory chip EPCS4, the board with a reconfiguration key.

15) AS and JTAG download interface: JTAG interface can be used to download the programme directly to the FPGA chip, or AS interface to download the programme to the memory chip, so as to achieve the data is not lost when power down.

16) power supply expansion port: you can expand the output power supply voltage 3.3V, 5V, GND interface, convenient external power supply.

17) the expansion of IO port: In addition to the development board module used IO, the board uses pins to lead out 28 IO, you can expand the use of other external devices.

The Shipping List:

1 X EP1C3T144 Development Board