Motor For Nissan Tiida C11 MK1 Latio C1112V DC Central Door Lock Motors VD264Y08 VD325107 VD868Z06 DIY CAR PART kit TOOLS new

For 2004-2012 Nissan Tiida C11

For 2004-2012 Nissan Tiida Latio C11

OE number:

1. Shell: FC280;

2. Total shaft length: 45 mm;

3. Turning: reversal;

4. Speed: About 12000 rpm;

5.voltage 12V; current 0.08A

Advantage:

1.Brand new motor

2.Pure copper brush

3.High speed operation

4.Motor housing material: Aluminum alloy

5.Rear cover material:rigid plastics

6.Worm material: copper

7.Internal coil material: Pure copper

8.Internal carbon brush material: high copper

9.Easy to install

10.Packing bag:Solid, waterproof, Private label, airtight

Tips

Car door lock motor Product Description:

Why need Change motor?

1. After locking car by remote control, the door won't lock properly, because the motor has gone bad, it has stopped working.

2. when the car door lock sometimes work , sometimes get stuck, or remote control can sometimes open, sometimes fixed card in the Middle,then press the remote control several times to open; ageing motor, motor torque has become smaller, motor power is not lock pieces of gear.

3. when driving in the car, after the door lock, door locks has problem that door can be opened.

Professional advice:

1. door lock Assembly easy to repair it? Locked inside the motor can change?

Locking block Assembies are fixed by screws, so they can be easily opened using a screwdriver, replace the motor is also very convenient, put it back together again is also easy.

2. replace motor or directly changed the locks block Assembly which is better?

4S shop for original locking block Assembly parts to more than $150, and a motor less tahn $15, a difference of more than 10 times. Known, locked inside metal and plastic parts ' life-or at least more than 20 years, so after changing the motor, you get a set of original locking block Assembly,renewed motor like changing batteries, because the carbon brushes of the motor service life has expired. Symptoms,when the car door can sometimes lock, sometimes won't lock, sometimes open and sometimes will notopen, motor age,motor carbon brush wear is too large, motor torque has become smaller, motor power is still locked inside the spring. After the emotpe-controlled lock andthen unlock, problematic lock blocks, can't open the door from the outside, it can be opened from the inside,left key can open the front door. And in the case of not locking the car, can play both inside and outside the door,unlocked again after locking the car, still same problem, which can open the door, but couldn't open the door.