If you need to buy in bulk, please contact me and I will give you a big discount

-100% brand new

-We focus on high quality products

-Each item is strictly tested before shipment

-Perfect match for the car

-each parcel will be carefully packaged
WARRANTY: 2 years

 

   

FIT FOR

Installation instructions: (High seven with automatic fog lamp version)
This module is characterized by plug-and-play and never break the line. It is directly connected in series between the original car switch and the wiring harness, and it can be used by plugging in
Installation process
Remove the switch: in the off position (0 gear), press down the switch knob firmly: hold the switch and turn it clockwise: pull the switch out and it will come out. (Attention is to pull gently, if the resistance is large, it means that the pressure is not in place, or the rotation is not in place, and it cannot be deadlifted)

 

Module based on AUTO switch, then in the AUTO position is the automatic gear, the light will be turned on or off according to the change of light

set up:

When inserting the key and opening the switch, the operation is as follows: (The learning function has a light range, and the light will not be lit immediately when learning)

(A) Learning width light: If you want to turn on the width light earlier, please do the following when it is appropriate to turn on the width light:
AUO gear→width indicator light→AUTO gear, if successful, the module will beep twice, and the setting is complete! If the light is within the range of the wide indicator light, the indicator light will turn on immediately. If the light is brighter during setting, turn on the width indicator light and turn it on the earliest.
(B) Learning headlights: If you want to turn on the headlights earlier, please do the following when it is appropriate to turn on the headlights:
 AUTO→headlights→AUTO, if successful, the module will emit three beeps, beeps, beeps, and the setting is complete! If the light is within the range of turning on the headlights, the headlights will be turned on immediately. If the light is brighter when setting Turn on the headlights as the earliest. (c) The tunnel mode is turned on and off: the operation is as follows, if AO→O→AUTO beeps once, the tunnel mode is turned on, and the tunnel mode is turned off with two beeps.
(D) Automatic fog lamp setting: please pull out the fog lamp directly in the AUTO position 1 (fog lamp linkage means: when the light is turned on, the fog lamp or the width indicator lamp and the headlight are turned on together)


The following operations are performed when the key is removed:
(E) Set the night safety warning function: After the fire is turned off at night, the width light flashes for a set time to warn the surrounding people and cars to pay attention to the safety of the car. When the key is removed, AUTO→headlight→AUTO, do this twice, this At this time, the module will beep once, the width indicator light will start to flash, and the module will start timing. When the time you want to set, the module will beep once again when you turn the switch to the headlight position. If the setting is completed, if you turn the switch within 5 To the headlight position, the warning function will be cancelled. If the switch is not rotated over 60, the default time will be 60 seconds

All the above operations need to be completed within 2S! It will not succeed if the time is too long, please try again


Notice:

1. Tunnel mode: The light in the tunnel is gradual. If you enter the tunnel in broad daylight, the human eyes cannot adapt to it at once, but the light cannot meet the conditions for turning on the lights. Often the lights can only meet the conditions for turning on at the depths of the tunnel. The tunnel mode with slow response when turning on lights is set to solve this problem. It can turn on the lights as soon as possible. Satisfy users who often go through caves or tunnels. The disadvantage is that the sensitivity is too high, and the headlights are easily triggered by the shade of some overpasses in the evening! It is recommended that urban users turn off the tunnel mode. When the road conditions such as high speeds need to respond quickly, manually operate the switch to temporarily turn on the tunnel mode. The stability of turning on the lights in urban road conditions can also realize the rapid response of high-speed tunnels!

2. The reason that the induction function is activated with a delay of 10S. When the switch is first opened, the headlights will increase the battery load when the electric load of the whole car is very large. The delay of 12S is based on the consideration of protecting the battery. (The module does a battery voltage monitoring and the induction delay is up to 12s, and the headlights will start within 2 after ignition)

3. Module flameout safety warning function, if it is not needed, remove the key and follow the above instructions to cancel the setting method (E). Pay special attention to if the module is powered off, the safety warning function will be automatically restored. If the module is not pulled out and the flameout safety warning function appears after ignition, pay attention to whether the battery is insufficiently charged or is about to be damaged