Keyestudio RPI TFT 3.5 Inch LCD Touch screen Shield for Raspberry Pi 3B/4B 480x320 16-Bit Pixels CE Certification - AliExpress.io

Specifications

Brand Name: keyestudio
Origin: Mainland China
High-concerned chemical: None
Condition: New
Type: Voltage Regulator
Supply Voltage: 5V
is_customized: Yes
Operating Temperature: 0-40
Application: Electric Toy
Package: SOP

Product Description

Introduction

It is the cutest, little display for the Raspberry Pi. It features a 3.5" display with 480x320 16-bit color pixels and a resistive touch overlay.

It supports any revision of Raspberry Pi (directly-pluggable).

Program Writing

1.Writing an image to the SD card

In our supporting files, you will find the image file “2016-05-27-raspbian-jessie” which is an operation system come with a Desktop Environment.

You need to use an image writing tool like Win32DiskImager to install it on your SD card. Then write the image into your SD card.

2.Log in the Pi

Insert the SD Card and finally attach the power supply.

The Raspberry Pi will boot immediately. This will take a little bit more than a minute. Once the Pi is booted it will ask you for the username and the password.

By default the following log-in credentials can be used:

Username: pi
Password: raspberry

3.Programming

How to connect Raspberry Pi 3B

1.Burn the image file “2016-05-27-raspbian-jessie” in the storage card of Raspberry Pi.

2.Log in Raspberry Pi with desktop display system, place LCD-show-160813.tar file in the Pi folder on Raspberry Pi system through WinSCP.

3.Execute tar xzvf LCD-show-160813.tar in the terminal. unzip LCD-show-160813.tar to get LCD-show folder.

4.Input cd LCD-show in the terminal to enter folder and type sudo ./LCD-show to run program.

Once this is done, your Raspberry Pi will reboot automatically:

How to Connect to Raspberry Pi 4B

1.Burn the system image file“RPi-35inch-LCD-(A)-Raspbian-190722”in the storage card of Raspberry Pi.

2. Copy ssh file to the root directory of system

3. Find out IP address via external screen and mouse

4. External screen displays the corresponding pictures after connecting, click LCD and set

5. Type cd LCD-show in the terminal and enter the folder. We could change the rotation direction of screen through the below commands, rotate 0°

Source Code and Installation Package:
//fs.keyestudio.com/KS0214

Pros & Cons

Pros

480x320 resolution with touch overlay
Direct fit for Raspberry Pi 3B/4B
Easy SD card image setup
CE certified for safety

Cons

Resistive touch less precise than capacitive
0-40°C temp limit for hot environments
5V only, no higher voltage
SOP package may need careful handling

Common Questions

What is the resolution and size of the Keyestudio RPI TFT screen?

3.5 inch LCD with 480x320 16-bit pixels, resistive touch.

Which Raspberry Pi models is the TFT shield compatible with?

Directly pluggable with Raspberry Pi 3B/4B and any revision.

What is the supply voltage for the Keyestudio touch screen?

5V supply voltage, operating temp 0-40°C.

How to set up the Raspberry Pi 3.5 inch LCD shield?

Write image to SD card from supporting files, plug-and-play.

What certification does the Keyestudio screen have?

CE certified, SOP package from Mainland China.