Émetteur-récepteur sans fil pour lumières de fête laser Chang, contrôleur XLR DMX 2.4, câble USB, 5 broches, 512G

Features:

DMX512 wireless transmitter transmits standard DMX512 protocol data ( generated by console ) by wireless way.
No time delay when signal data is transmitting, signal data is real time and reliably.
This product adopts a 2.4G ISM frequency section.
High effective GFSK modulate,communication design; 126 channels jumping frequency automatically, high anti-jamming ability.
126 channels jumping frequency automatically, high anti-jamming ability, to ensure works reliability.
7 groups ID code settable,User can use 7 groups individual wireless net without any interfere each other in the same place. ( Tricolor LED displaying Indicators )

Specification:

2.4G wireless DMX512 R/T
Input voltage: 5VDC 500mA MIN
Receive Sensitivity: -94dBm
Max transmitting power rate: 20dBm
DMX connector: 5pin male/5pin female
Communication distance: 600M ( visible distance )
Work frequency section: 2.4G ISM, 126 channels.frequency section
Plug standard: US / EU /AU/UK ( optional )
Material: zinc alloy + plastic
Item size: 21 * 2.5 * 2.5cm/8.26 * 0.98 * 0.98in ( L * W * H ) ( 1pc )
Package size: 14.5 * 10.5 * 4.5cm/5.7 * 4.13 * 1.77in ( L * W * H )
Package weight: 180g / 6.36oz

Operating manual:

ID code and LED color corresponding relationship:
1: RED
2: GREEN
3: RED+GREEN
4: BLUE
5: RED+BLUE
6: GREEN+BLUE
7: RED+GREEN+BLUE
1). Press momentary switch above the side led indicator to indicate ID setting.
2). Press again to set IC, to the color ID desired, adding 1 each time you press the switch will advance the color IDcode.
3). Working condition:
LED constant lit up: No DMX or wireless signal.
Red LED flash: Transmitting.
Green LED flash: Receiving
4) RF frequency 2.400 - 2.525G, total 126 channels, it’s searching automatically.
5). ID Code “1-7” groups ID code, press ‘KEY’ for setting, it only can work under same ID code of transmitter and receiver. ( Same LED Color )

Establishing Communication:

1. Power on DMX512 wireless received board first and then following to power up the transmitted board.
2. Press “Key” button to set same ID value of transmitted board and received board. Please use different ID value if you need use more than 1 group wireless universals at same time in same place.
3. The red LED flashes when transmitter transmits DMX data by no interfered frequency section, then receiver changes communicated frequency section. Green LED flashes until received same ID value, the more DMX data, the faster the LED flashes.
4. Communication was established correctly.

Packaged including: (Depends on your order)

1R= 1pc receiver+ 1pc power adapter+1pc USB cable

1T = 1pc transmitter +1pc power adapter+1pc USB cable

1T and 1R= 1pc transmitter + 1pc receiver +2pcs power adapters+2pcs USB cable

1T and 2R= 1pc transmitter + 2pcs receivers+3pcs power adapters+3pcs USB cable

1T and 3R= 1pc transmitter + 3pcs receivers+4pcs power adapters+4pcs USB cable

1T and 4R= 1pc transmitter + 4pcs receivers+5pcs power adapters+5pcs USB cable

1T and 5R= 1pc transmitter + 5pcs receivers+6pcs power adapters+6pcs USB cable

1T and 6R= 1pc transmitter + 6pcs receivers+7pcs power adapters+7pcs USB cable

1T and 7R= 1pc transmitter + 7pcs receivers+8pcs power adapters+8pcs USB cable

1T and 8R= 1pc transmitter + 8pcs receivers+9pcs power adapters+9pcs USB cable

2T and 3R= 2pcs transmitter + 3pcs receivers+5pcs power adapters+5pcs USB cable

2T and 4R= 2pcs transmitter + 4pcs receivers+6pcs power adapters+6pcs USB cable

2T and 5R= 2pcs transmitter + 5pcs receivers+7pcs power adapters+7pcs USB cable

2T and 6R= 2pcs transmitter + 6pcs receivers+8pcs power adapters+8pcs USB cable

2T and 7R= 2pcs transmitter + 7pcs receivers+9pcs power adapters+9pcs USB cable