XCR-Cartouche chauffante pour imprimante 3D, 12V/24V 50W 70W, tube chauffant Hotend 6x20mm, haute température pour E3D V6 Volcano Heaterblock - AliExpress.io

Specifications

Nom de marque: XCR3D
Type D'article: Tube chauffant
Numéro de Modèle: Heating pipe
Origine: CN (Origine)
Produit chimique à haute préoccupation: Aucun
Choice: yes
semi_Choice: yes

Product Description

Product specification

Voltage: 12V/24V

Power: 50W

Heating head size: 6 * 20mm

Heating head material: 304 stainless steel

Line length: 1M and 2M for option

Line thick: 0.5 mm⊃2; (The cross section of the copper wire inside the heater is 0.5mm⊃2;)

Color: as shown in the picture

Heating temperature: up to 350 degrees

Single-ended heater instructions

1. The effective heating part of the heater must keep dry.

2. The electrical connector of the single-ended heater should be placed out of the insulation layer and heating room, and the working voltage shall not exceed its rated value of 10%. The shell should be effectively grounded.

3. Electric components working environment, the temperature should not be greater than 95 degrees, no explosive or corrosive gases.

4. Electric components should be stored in a dry place.

The improvement compared to ordinary red heater

1. From the original ordinary 0.3-line high-temperature line to 0.5-line thick white high-temperature line, can bear higher temperature, and looks more beautiful.

2. From the original 40W power to 50W, therefore, the maximum temperature increases from 300-31℃ to 340-350℃ or so.

3. The new version heater used in all imported skills, the use of 304 stainless steel, with the internal use of 2080 nickel chrome wire to achieve maximum service life.

4. Support the customization of different specifications, length, resistance of the heater.

5. Can be used with the new HT-NTC100K temperature thermistor (Temperature measurement can be up to 350 degrees).

Pros & Cons

Pros

Acier 304 résistant haute température.
Options 12V/24V 50W/70W puissantes.
Compatible E3D V6 Volcano standard 3D.
Ligne longue 1-2M flexible.

Cons

Taille fixe 6x20mm, pas universelle.
Risque surchauffe sans contrôle.
Marque XCR3D niche.
Fils fins 0.5mm² limités ampérage.

Common Questions

De quel matériau est cette cartouche chauffante XCR pour 3D ?

Tube en acier inox 304, puissance 50W/70W 12V/24V, hotend 6x20mm.

Quelle est la taille de ce tube chauffant E3D V6 Volcano ?

6x20mm heating head, ligne 1M/2M, section 0.5mm² cuivre.

Compatible avec quelles imprimantes 3D ?

Pour E3D V6 Volcano Heaterblock, haute température hotend 3D.

Comment utiliser cette cartouche 12V/24V 50W ?

Installez dans hotend pour chauffer résine/filament jusqu'à haute température.

Délais livraison cartouche XCR3D depuis CN ?

7-20 jours, options 1M/2M ligne, couleur standard.