Dual Drive Controller with LCD Display 25A +25A in 1 Piece For Motor 36V 48V 60v 800W 1000W 1200w
You will be redirected to AliExpress to complete your purchase
Specifications
- Brand Name
- LAZY
- High-concerned chemical
- None
- Origin
- Mainland China
- Type
- Controller
- Indicator Panel
- LCD
- model
- BLDC Dual drive controller
- max current
- 25A+25A
- Hall sensor
- yes
- sine wave
- yes
Product Description
Kindly please note,
a, this controller needs work with hall sensor, please don't buy it if there is no hall sensor wire from your motor.
b.24v motor or battery, it will not work.please don't buy it if motor and battery is 24v
C. 2 accelerator method. Accelerator from lcd display or add new accelerator on controller with standby accelerator.
When you add extra accelerator, the accelerator on lcd dsiplay will not work.
wire of controller
What's included in the package?
1 piece 36v 48v 60v dual drive controller+lcd display
2 pcs 3 wire mount box
Technical data of the hub motor,
Voltage: 36v 48v 60v
Low Voltage, 28v /40v
Suitable for motor power 500w-1200w （the controller will not work if battery voltage is 24v, please don't choose this controller if the motor power smaller to 500w）
Max current 25A for single side motor
Angle 120 degree
controller size, 80*110*50mm, wire length 120-150mm
Function of the controller
Single/dual drive choice
Auto-learn wire
Soft/hard start
Standard by accelerator
Accelerator Lcd display
LCD DISPLAY SETTING
Wire from LCD display
Red (vcc) Lcd display power wire
Blue(K) Controller power wire
BLack(GND) LCD display GND wire
Green (RX) LCD display data receiving wire
Yellow (TX) LCD display data sending wire
LCD display data setting, Long press power key and mode key into setting page.
Power key for page change and mode key for data change
P01 Lightness, 1 is dark and 3 is lightest
P02 Mileage km or mph
P03 Voltage setting 36v-72v
P04 Sleeping time, 0 is none and other data is 1-60 minutes
P05 Assistant level 0-3
P06 Wheel size inch in 0.1inch
P07 Magnet pcs
P08 Speed limited 0-100km/h, 100 means no speed limited
P09 Zero start or non-zero start
P10 Drive mode 1 electric drive
P11:PAS none
P12 Start hardness, from 0-5
P13 PAS setting (NONE, IT CAN’T BE REALIZED SINCE THERE IS NO PAS WIRE FORM CONTROLLER)
P14 Controller current Limited set
P15 Controller voltage short setting 48v is, 60v is ,72v is.
P16 None
P17 Cruise, 0 is no cruise, 1 is yes
P18 ABS brake hardness, 0-3, soft to hard (not work, this controller is low and high brake choice)
Error Code or Driving situation
0 Normal
1 Stay
2 Brake fault
3 None
4 6km/h
5 Cruise
6 Battery Voltage Short
7 Motor fault
8 Accelerator fault
9 Controller fault
10 Lcd display receiving fault
11 Lcd display sending fault
12 BMS communication fault
13 Front light fault
Any question, please feel free to contact us.
Product information last updated on January 8, 2026