AliExpress.io
ESP32-S3 7 inch 800X480 LCD Display Touch Screen Development Board 32-bit LX7 Dual-core Processor WiFi BT for ESP32 HMI LVGL GUI

ESP32-S3 7 inch 800X480 LCD Display Touch Screen Development Board 32-bit LX7 Dual-core Processor WiFi BT for ESP32 HMI LVGL GUI

4.137+ sold
$51.41$57.12
10% OFF
Buy on AliExpress

You will be redirected to AliExpress to complete your purchase

Specifications

Brand Name
NONE
Origin
Mainland China
Display Mode
Null
High-concerned chemical
None
Resolution
800*480
Model Number
ESP32-S3-Touch-LCD-7
Type
TFT
LCD Size
7 inch
5-point Touch
Yes
Processor
32-bit LX7 Dual-core
WiFi
Support
Bluetooth
Support
Display Color
65K RGB
MicroPython
Support
C/C++
Support

Product Description

Wiki://www.waveshare.com/wiki/ESP32-S3-Touch-LCD-7
ESP32-S3-Touch-LCD-7

Integrates RGB Interface LCD With 5-Point Capacitive Touch, Multiple Peripheral Interfaces

 

 
Features

ESP32-S3-Touch-LCD-7 is a microcontroller development board with 2.4GHz WiFi and BLE 5 support, integrates high-capacity Flash and PSRAM. Onboard 7inch capacitive touch screen can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications

  • Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency

  • Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna

  • Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and 8MB Flash

  • Onboard 7inch capacitive touch display, 800×480 resolution, 65K color

  • Supports capacitive touch control via I2C interface, 5-point touch with interrupt support

  • Onboard CAN, RS485, I2C interface and TF card slot, integrates full-speed USB port

  • Supports flexible clock, module power supply independent setting, and other control to realize low power consumption in different scenarios

Application Scenarios

Supports Multiple Peripherals

Supports The Expansion Of Multiple Peripherals Via Sensor, CAN, RS485, And I2C Interfaces

Application Example

for reference only, please refer to the Package Content for the detailed part list

What's On Board

  1. ESP32-S3N8R8
    The SoC with WiFi and Bluetooth, up to 240MHz operating frequency, integrated 8MB PSRAM and Flash

  2. 7inch display panel connector

  3. Touch panel connector

  4. TF card slot

  5. USB Type-C port

  6. UART1 Port
    USB TO UART Type-C port

  7. UART2 connector
    UART1 and UART2 are the same UART, selected by switch

  8. Sensor header

  9. CAN header

  10. I2C header

  11. RS485 header

 

  1. 3.7V single lithium battery PH2.0 header

  2. CAN terminal resistor selection

  3. RS485 terminal resistor selection

  4. UART selection
    select UART1 or UART2

  5. BOOT button
    Press and hold while powering on for program burning

  6. RESET button

  7. I2C level selection
    3.3V / 5V

  8. DONE
    Lithium battery charging completed indicator

  9. CHG
    Lithium battery charging indicator

  10. PWR
    Power supply indicator

Outline Dimensions



Pros & Cons

Pros

  • ESP32-S3 dual-core with WiFi/BT for versatile IoT
  • 7-inch 800x480 5-point touch LCD
  • Supports MicroPython, C/C++, LVGL GUI
  • High-capacity Flash and PSRAM

Cons

  • No brand specified, potential support issues
  • Assembly or driver setup required
  • Limited to specific programming environments
  • Display mode null, calibration needed

Common Questions

What processor and display specs for ESP32-S3 7 inch board?

32-bit LX7 dual-core, 800x480 resolution, 7-inch TFT LCD.

What size is the ESP32-S3 Touch LCD-7 development board?

7-inch LCD with 5-point capacitive touch.

Is this board compatible with WiFi, BT, and programming?

Supports WiFi, Bluetooth, MicroPython, C/C++; LVGL GUI, HMI.

How to use this ESP32 HMI development board?

For IoT projects with 65K RGB color, multiple peripherals.

Shipping details for ESP32-S3-Touch-LCD-7 from China?

Mainland China; wiki available for setup.

Product information last updated on April 21, 2026

Back to Optoelectronic Displays