DWIN 3.5 Inch LCD Display Module 320*480 HMI Commercial Grade Touch Panel Connect Arduino ESP32 STM32 UART TFT DMG48320C035_03W - AliExpress.io

Specifications

Brand Name

DWIN

Origin

Mainland China

Display Mode

None

High-concerned chemical

None

Resolution

16*2, 320*480

Model Number

DMG48320C035_03W

Type

TFT

is_customized

Yes

Size

3.5inch

Color

16.7M

Operating current

180mA@5V

Operating Temperature Range

-20/+70

LCD Technique

IPS

Touch panel type

Resistive or Capacitive touch panel

Brightness

250/300nit

Power supply voltage (V)

4.5~5.5V

Power supply current (mA)

130mA@5V

Communication

TTL/CMOS

Memory

16M Bytes

Connector socket

10Pin_1.0mm FCC Socket

Application

Commercial grade

Product Description

Features

Based on T5L1, running DGUS II system, commercial grade.
3.5-inch, 320*480 pixels resolution, 16.7M colors, IPS-TFT-LCD, wide viewing angle.

Display parameters
LCD Type		IPS, TFT LCD
Viewing Angle		Wide viewing angle, 85°/85°/85°/85°(L/R/U/D)
Resolution		320×480 pixels (0°/90°/180°/270°
Color		24-bit 8R8G8B
Active Area (A.A.)		49.0mm (W)×73.4mm (H)
Backlight Mode		LED
Backlight Service Life		>20000 hours (Time of the brightness decaying to 50% on the condition of continuous working with the maximum brightness)
Brightness		WTC:250nit WTR:250nit WN:300nit
Brightness Control		0~100 grade (When the brightness is adjusted to 1%~30% of the maximum brightness, flickering may occur and is not recommended to use in this range)

Serial interface parameters
Mode	UART2: TTL/CMOS UART4: TTL/CMOS (Only available after OS configuration)
Voltage Level	Test Condition		Min	Typ	Max	Unit
	Output 1, Iout = 1mA		3.0	3.3	-	V
	Output 0, Iout = -1mA		-	0	0.3	V
	Input 1, Iin = 1mA		2.4	3.3	5.0	V
	Input 0, Iin = -1mA		0	-	0.5	V
Baud Rate	3150~3225600bps, typical value of 115200bps
Data Format	UART2: N81 UART4: N81/E81/O81/N82 ,4 modes (OS configuration)
Interface Cable	10Pin_1.0mm

Electrical specifications
Rated Power		<5W
Operating Voltage		4.5~5.5V, typical value of 5V
Operating Current		180mA	VCC=12V, max backlight
		80mA	VCC=12V, backlight off
Recommended power supply: 5V 1A DC

Operating environment
Operating Temperature		-20℃~70℃(5V @ 60% RH)
Storage Temperature		-30℃~80℃
Conformal coating		None
Operating Humidity		10%~90%RH, typical value of 60% RH

ESD Test
Test temperature: 25°C. Test humidity: 50%RH. Test process: the product was placed on the test bench to perform contact and air discharge in turn of the serial screen iron frame and display area . During the experimental process, it was observed whether the screen is dead, black, white, splash, or reboot. According to the experiment results,the performance is in line with the criteria GB/T 17626.2 B level and above.
Discharge Type		Discharge Value		Result
Contact discharge		±6KV		Normal operation
Air discharge		±8KV		Normal operation

Packaging & dimensions
Form Factor		WTC:61.1mm (W)×103.3mm (H)×12.3mm (T) WTR:61.1mm (W)×103.3mm (H)×12.1mm (T) WN:61.1mm (W)×103.3mm (H)×10.5mm (T)
Installation Dimensions		Positioning hole: 55.5(+0.3mm)×84.0(+0.3mm)
Net Weight		WTC:65g WTR:65g WN:50g

FAQ

Question 1:

How can I start development with a DWIN LCD Module? Can I assemble it directly on my machine?
Answer:

No, you should update the program to LCD at first, and then assemble it.
Step 1, check the software platform of the screen, it mentioned in datasheet.
Step 2, use the correct development SDK (different platform use different SDK) to finish developing.
Step 3, update software program and test
Step 4, when test OK, assemble it on machine.

Question 2:

What industries are DWIN LCD used in?
Answer:

Beauty machine, Physical therapy, Health and fitness, Medical treatment, Air treatment, Air control, Transportation (Car &ship instruments), instruments and apparatus automation, Electricity, Water treatment, IC design and manufacture, Kitchen appliances (Juicer, oven, ice machine, ice-cream machine, kitchen ventilator), New energy(Photovoltaic, Wind electricity, Charging Pile), Household appliances…

Question 3:

Does DWIN product need a MOQ when purchase?
Answer:

No MOQ for standard product.

Question 4:

Will DWIN have online technical support?
Answer:

Yes,of course, below ways you can get technical support.

- Whatsapp: +86 19192113166
- Customer service email: dwinhmi@dwin.com.cn

- DWIN Developer Forum://forums.dwin-global.com/

- International website://www.dwin-global.com/

- Development tool://www.dwin-global.com/tool-page/

- Development guide://www.dwin-global.com/development-guide/

- DGUS video tutorial://www.dwin-global.com/t5l-dgus-v7-6-video-tutorial/
- Leave messages to us on Aliexpress.

Pros & Cons

Pros

High-res 320x480 IPS 3.5inch with wide viewing angle and 16.7M colors
Versatile UART for Arduino, ESP32, STM32 integration
Commercial grade -20/+70°C, resistive/capacitive touch options
Low power 130mA@5V with 16MB memory for HMI apps

Cons

Limited brightness 250/300nit for direct sunlight use
Connector 10Pin FCC specific, may need adapter
DGUS II system proprietary, learning curve for custom UI
Mainland China origin, potential quality variance

Common Questions

What resolution and size is the DWIN 3.5 Inch LCD Display Module?

320x480 resolution, 3.5inch IPS TFT LCD with 16.7M colors.

What touch type and power supply for DMG48320C035_03W HMI?

Resistive or capacitive touch, power 4.5-5.5V, 130-180mA@5V.

What communication interface for Arduino ESP32 STM32 connection?

TTL/CMOS UART communication, 10Pin 1.0mm FCC socket.

What operating temperature and brightness for this TFT module?

-20/+70°C range, 250/300nit brightness, wide viewing angle.

What memory and application for the DWIN Commercial Grade Touch Panel?

16M Bytes memory, commercial grade HMI for Arduino/ESP32 projects.