CMOS Type Laser range sensor Laser distance sensors Laser displacement sensor Laser sensor Switch analog dual-output PNP LS-F

Laser ranging
displacement sensor

Micrometer measurement accuracy

Pre-sales and after-sales technical support

Switching quantity analog quantity dual output

Detection range from 25 to 600MM for a variety of applications

At the same time, it has dual output of switching quantity
and analog quantity

Laser displacement sensor

Five detection series are available: 30, 50, 100, 200, and 400

Small size, small light spot, high precision

Capable of single output of switch quantity, dual output of switch quantity and analog quantity

Multiple functions and detection modes, suitable for more application scenarios

Large output indicator light of the department

Thin film buttons, easy to operate

Application Cases

Check for the presence of micro flat pads

Detect the remaining amount of roll material

Detecting the bending amount of thin plate materials

LS-F100WN/P:

Detection center distance 100mm

Detection range ± 35mm

Repetitive accuracy of 100 μ m

Linearity ± 0.2% F.S

Temperature characteristics 0.03% F.S./℃

Light source: Class 2 red semiconductor laser, maximum output: 1mW, emission beam wavelength: 655nm

The beam diameter is about Φ 150 μ m

Power supply voltage 12V-24VDC ± 10% pulsating P-P 10%

Consumption current below 40mA (when the power supply voltage is 24V DC), below 60mA (when the power supply voltage is 12V DC)

Control output NPN open circuit collector transistor · Maximum inflow current: 50mA External voltage: below 30V DC (control output -0V) · Residual voltage: below 1.5V (inflow current below 50mA) Leakage power supply: below 0.1mA PNP open circuit collector transistor · Maximum source current: 50mA · External voltage: below 30V DC (control output -+V) · Residual voltage: below 1.5V (outflow current below 50mA) Leakage power supply: below 0.1mA

The output action can be switched between ON when illuminated and ON when not illuminated

Short circuit protection equipment (automatic recovery type)

Analog quantity: Voltage analog output (in case of alarm:+ 5.2V) Output range: 0V-5V output impedance: 100 Ω

Output: Voltage analog output (0mA in case of alarm) Output range: 4-20mA Load impedance: 300 Ω or less

Reaction time 1.5m/5m/s10ms switchable

External input NPN/PNP contactless input, effective: 0V -+1.2VDC input impedance: 10K Ω

Protection level IP65

Pollution level 2

Environmental temperature range for use: -10 ℃ -+40 ℃ (be careful not to condense or freeze). When storing:- 20℃- +60℃

Use environment humidity of 35% -85% RH, when stored: 35% -85% RH

Use incandescent lamps with ambient illumination: illumination level below 3000Lx

Using altitude below 2000m

Cable strap 0.15mm Φ 5 core composite cable 2m

Material body shell: aluminum casting, front cover plate: acrylic based

Weight approximately 35g (excluding cables) and approximately 85g (including cables)

Applicable specifications comply with EMC directive