Pluto Plus 70MHz - 6GHZ AD9363 SDR Radio Receiver /Transmitter 2x RX/ 2x TX Compatible with ADI ADALM-PLUTO PLUTO+
You will be redirected to AliExpress to complete your purchase
Specifications
- Brand Name
- AISANRAY
- Item Type
- Adapter
- High-concerned chemical
- None
- Origin
- Mainland China
- Model Number
- pluto plus
Product Description
Use tutorial and software download address:
//drive.google.com/file/d/1OnJOtojzaN82d3yuHzG1YkfeXNFKKYbA/view
//github.com/plutoplus/plutoplus/releases
1.Product Overview:
Pluto+ is a software-defined radio platform that supports 2TX 2RX, supports Gigabit Ethernet and Micro SD card. The design draws on the well-known ADI ADALM-PLUTO and improves its shortcomings.
2.Features：
ADC/DAC：AD9363(Can hack to AD9361 or AD9364)
2 Transmit, 2 Receive channel
RF Range：70MHZ~6GHZ
Ref Clock：VCTCXO 40MHZ0.5ppm
SOC：Zynq7010 FPGA：28k
RAM：512M
FLASH：32M
USB：2.0support OTG
Ethernet：1000Mb
Micro SD can use to boot
DC IN：5V +-0.5V-2AmicroUSB
Interface
Please note that all IO levels are 1.8V.
3.1 When using the official ADI-PlutoSDR firmware, please connect to URST-MI052.
3.2 When using Pluto+ firmware and need to support Ethernet, please connect URST-MIO46
3.3 When using SD card to boot, please connect SD-H to 1V8
3.4 When using JTAG to debug, please connect JTAG# to GND
3.5 Please connect EXCLK to GND when using external reference clock input
PTT key port
PTT drives optocouplers through GPIO0 (MI00), which requires an external relay or control circuit.
DFU KEY
At any time, you can press the DFU button and power on PLUTO+ again to enter the DFU mode, but you need to connect the URST jumper to MI052
Ref CLK input IPEX
You can connect a cable to input an external high-precision reference clock for AD9363 through the IPEX interface.
The main level should not exceed 3.3V, and the EXCLK jumper needs to be connected to GND to turn off the built-in clock
Calibrate the frequency of the built-in VCTCXO
The frequency of the 40M clock can be fine-tuned by adjusting the adjustable resistor next to the VCTCXO, provided that you have a reference signal source
Micro-SD
Support booting via SD card, need to connect SD-H jumper to 1V8
Pros & Cons
Pros
- Full-duplex radio support with 2 RX and 2 TX channels
- Fast data transfer via Gigabit Ethernet and expandable storage via Micro SD card
- Compatible with ADI ADALM-PLUTO and open-source Pluto+ software tools
- Includes official tutorial and software download links to simplify initial setup
Cons
- No exact physical dimensions listed, preventing users from planning custom enclosures
- The product description is incomplete, leaving critical technical details undisclosed
- No specific information about compatible operating systems beyond partial listed specs
- No clear warranty or return policy information is provided in the listing
Common Questions
What materials is this Pluto+ SDR radio platform constructed from?
The official product listing does not specify exact construction materials for this SDR unit.
What are the physical dimensions of this Pluto+ SDR device?
Exact physical dimensions for this SDR unit are not listed in the product listing.
Which existing SDR platforms and software is this Pluto+ unit compatible with?
This device is fully compatible with ADI ADALM-PLUTO, and supports custom software available via the provided Google Drive tutorial link and GitHub releases page. It also includes 2 RX and 2 TX channels for flexible radio use.
What practical uses does this Pluto+ SDR radio have?
This SDR platform can be used for radio receiver/transmitter projects, including wireless communication testing, ham radio operations, signal monitoring, and custom radio frequency projects.
Where will this SDR radio unit be shipped from?
This product originates from Mainland China, so it will be shipped from a supplier based in this region.
Product information last updated on November 24, 2025