MOFI POWER.S-8-RC Rectifier Filter With Capacitor Array 8PCS CRC(Nover 50v-10000uF X8)-DIY KIT
You will be redirected to AliExpress to complete your purchase
Specifications
- Brand Name
- OnifealiMajeson
- High-concerned chemical
- None
- Origin
- Mainland China
- Compatible Audio & Video Equipment Style
- Amplifier, Professional Audio Equipment
- Certification
- NONE
Product Description
DIY KIT Project
To complete this project, high level knowledge of electronics and rich experience in terms of soldering and testing are required.
Due to time zone and language communication restrictions, we can only provide limited technical support, and you need to solve problems by yourself.
We do not provide information other than the product introduction page.
Product configuration
DIY kit: Contains the PCB and the components needed on the PCB, but does not include the power transformer .
Finished board: Based on the well-tested board on the standard version kit, we verified all key points' voltage, and used the signal generator and oscilloscope for analog waveform double verification. We will not use this board for listening test.
All finished pcbs are all carefully hand-soldered and fully tests, so the price is higher and less cost performance. Price-sensitive consumers but with have DIY ability are recommended to choose the kit.
DIY KIT Instructions
Since the PCB holes are plated through, you only need to solder the parts from the bottom of the board. Do not drill or enlarge the holes because that would damage the through-plating.
Clean both sides of the blank PCB with paper towel and isopropyl alcohol or electronics flux remover, then solder the components to the board, starting with the lowest profile parts.
Make sure the correct part goes into each position on the circuit board. Measure each resistor with your multimeter to ensure it's the proper value.
Clean up the solder flux residue from the board with isopropyl alcohol (or electronics flux remover) and a brush.
Inspect all solder connections carefully, using a magnifying glass, to make sure there are no solder bridges or cold solder joints. Use a multimeter in ohms scale to check for short circuits. As a minimum, you should verify that the V+ and V- DC inputs are not shorted to ground, or to each other, and that the output pad isn't shorted to ground. Correct any mistakes before proceeding to the next phase.
Pics
DIY KIT
Finished board
Pros & Cons
Pros
- High-capacity 10000uF capacitors for stable power filtering
- Suitable for DIY audio amplifier upgrades
- Compact 8-piece array design
- Enhances professional audio equipment performance
Cons
- Requires advanced soldering and electronics expertise
- Limited technical support available
- No certification for safety
- DIY nature means potential for user errors
Common Questions
What components are included in this DIY kit?
MOFI POWER.S-8-RC rectifier filter with 8PCS CRC (50V-10000uF x8) capacitor array for amplifiers.
What size or compatibility does it have?
Compatible with amplifiers and professional audio equipment, requires soldering skills.
Is it suitable for beginners?
No, needs high electronics knowledge, soldering, and testing experience; limited technical support.
How is it used in audio setups?
DIY kit for rectifier filter in power supplies, enhancing audio performance in amplifiers.
Shipping and origin details?
From Mainland China, no certification listed, self-solve issues due to communication limits.
Product information last updated on January 11, 2026