XCR 12V/24V 50W 70W Heater Cartridge 3D Printer Parts Hotend Heating Tube 6*20mm High Temperature For E3D V6 Volcano Heaterblock
4.9141+ sold
$1.85
0% OFFBuy on AliExpress
You will be redirected to AliExpress to complete your purchase
Specifications
- Brand Name
- XCR3D
- Item Type
- Heating Tube
- Model Number
- Heating pipe
- Origin
- Mainland China
- High-concerned chemical
- None
- Choice
- yes
- semi_Choice
- yes
Product Description
Product specification
Voltage: 12V/24V
Power: 50W
Heating head size: 6 * 20mm
Heating head material: 304 stainless steel
Line length: 1M and 2M for option
Line thick: 0.5 mm⊃2; (The cross section of the copper wire inside the heater is 0.5mm⊃2;)
Color: as shown in the picture
Heating temperature: up to 350 degrees
Single-ended heater instructions
1. The effective heating part of the heater must keep dry.
2. The electrical connector of the single-ended heater should be placed out of the insulation layer and heating room, and the working voltage shall not exceed its rated value of 10%. The shell should be effectively grounded.
3. Electric components working environment, the temperature should not be greater than 95 degrees, no explosive or corrosive gases.
4. Electric components should be stored in a dry place.
The improvement compared to ordinary red heater
1. From the original ordinary 0.3-line high-temperature line to 0.5-line thick white high-temperature line, can bear higher temperature, and looks more beautiful.
2. From the original 40W power to 50W, therefore, the maximum temperature increases from 300-31℃ to 340-350℃ or so.
3. The new version heater used in all imported skills, the use of 304 stainless steel, with the internal use of 2080 nickel chrome wire to achieve maximum service life.
4. Support the customization of different specifications, length, resistance of the heater.
5. Can be used with the new HT-NTC100K temperature thermistor (Temperature measurement can be up to 350 degrees).
Pros & Cons
Pros
- Compatible with popular E3D V6 and Volcano hotend heater blocks
- Dual voltage and power options for versatile 3D printer use
- Durable 304 stainless steel construction with reliable heat transfer
- Two wire length options to fit different printer builds
Cons
- Maximum heating temperature specifications are cut off in the product listing
- Only available in a single pictured color, no custom finish options
- No mounting hardware included, requires existing hotend parts for installation
- Limited to 3D printer hotend use, not compatible with other heating applications
Common Questions
What voltage and power options are available for this heater cartridge?
It supports both 12V and 24V input, with power options of 50W and 70W.
Is this heater cartridge compatible with E3D V6 and Volcano hotends?
Yes, this heater cartridge is specifically designed for use with E3D V6 and Volcano heater blocks.
What materials and dimensions does this heating tube have?
The heating head is made of 304 stainless steel with dimensions 6*20mm, and internal copper wire with a 0.5mm² cross-section.
What wire length options are available?
You can choose between 1M and 2M total wire lengths for different 3D printer setups.
Do these heater cartridges contain any harmful chemicals?
No, there are no high-concern chemicals used in this 3D printer heating cartridge.
Product information last updated on December 15, 2025