2Pcs For PTFE Oil Fuel Line Hose End Fitting AN4 AN6 AN8 AN10 AN12 Straight 0° 45° 90° 180° Reusable Hose End Fitting Adapter

Features and Benefits

Note:
1. "ANx" is model instead of size.Please find the size detail in the size chart.
2. The length of product is full length which mention in option. If you want make a custom cut of the product, please feel free to contact us for help.
3. All products in this link are compatible each other, you just need to make a random chose the product what you want.
4.The material of PTFE pipe doesn't support overbending. Please be careful when using.



Specification:
Condition: New
Product Name: Fuel Hose Oil Gas Line
Length: 1M/3M/5M
Surface Finish: Braided

Nylon Hose
Outside Material: Nylon + Stainless Steel Wires
Inner Hose Material: PTFE
Color: Black
Working Temperature: -60 ℃ To 260 ℃
Working Pressure: 3000 PSI
Burst pressure: 10000 PSI
Hose Inside Diameter:8.13mm/0.32inch
Hose Outside Diameter: 11.92mm/0.46inch

Stainless Steel Hose
Outside Material: Stainless Steel Wires
Inner Hose Material: PTFE
Color: Silver
Working Temperature: -60 ℃ To 260 ℃
Working Pressure: 3000 PSI
Burst pressure: 10000 PSI
Hose Inside Diameter:8.13mm/0.32inch
Hose Outside Diameter: 10.92mm/0.42inch


Application:

For PTFE Hose End Fitting Only.

For Most Fluids. (Automotive fuels, Lubricants, Coolant, Brake fluid and E85 alcohol.)

For High Temperature High Pressure Applications. (Fuel injection hose, Turbo oil feed and boost line, Transmission oil cooler line, EFI fuel line, Carb fuel line, IS engine swap fuel line, Fuel return line, Vapor return line, Vacuum line, Fuel supply line.)



Features:

100% quality assurance tested, more responsive, less expensive, easier to install.

PTFE inner layer and one layer of polyester, one layer of stainless steel wrapped.

PTFE hose relatively hard, it can't be bend and folding in half.

Hold up a lot stronger to heat and extreme circumstances.

Will not deteriorate or swell over time.



Installation Notices:

1.Avoid twisting hose when installing.

2.Allow some slack in assembly in length for changes that occur under pressure.

3.When routing hose line, provide a smooth bend radius. Avoid sharp bends which may cause hose to collapse and restrict flow.




PTFE Hose End Fitting

Color: Black/Blue Red

Material: Aluminum Alloy

Angle: Straight,45 Degree,90 Degree,180 Degree


Description:

【High Quality】PTFE Hose Fitting is made of lightweight aluminum alloy ,material for strong strength and good durability. Black anodized for great appearance and anti-corrosion, superior thread strength.

【Applications】PTFE Hose Fitting is widely used in oil/ fuel/ water/ fluid/ air/ gas line, specially for E85 ethanol gasoline.Work with all PTFE stainless braided and nylon braided hoses.Please Attention that the PTFE hose end can be work with PTFE fuel line ONLY.

【Easy to Use】PTFE Hose Fitting swivel 360° to allow for a quick alignment of the hose,easy to use and don't require special equipment. Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends.

blowjob men,Pipe,Pipes,Pumps,1/4,ppr,reverse osmosis,Clamp,1/8,homebrew,oil burner glass pipe,Car exhaust pipe,gas adapter connection hose,3/4,Exhaust pipes for motorcycles,Plumbing,plumbing fittings,1/2,water hose connector pipe adaptor,dn8,3/8,Osmosis,Gas adapter,hose connector