
AIYIMA Audio A70 Stereo PFFB Leistungsverstärker TPA3255 300Wx2 Klasse D Hifi AMP für Passivlautsprecher mit XLR RCA Balanced Out
You will be redirected to AliExpress to complete your purchase
Specifications
- Markenname
- Aiyima
- Hochbetriebenes Chemikalienunternehmen
- Keine
- Maximale Leistung Pro Kanal
- Über 200 W
- Ursprung
- CN (Herkunft)
- Paket
- Ja
- Kanäle
- 2 (2.0)
- Zertifizierung
- CE, FCC, RoHS-Konformität
- Modellnummer
- A70
Product Description
Hightlight
Let's start with setting the volume to max using XLR input (all testing with 10 amp supply):
We see a nice boost in SINAD as predicted, landing the amplifier essentially in our "excellent" category:
RCA input has fair bit lower performance but still above average:
Note that I adjusted the volume down to 25 dB per my recent standard of testing amps (used to use 29 dB).
Noise performance is excellent:
Despite its lower gain with XLR input, you can still reach full power at 3.3 volts which is well below nominal 4 volts we see out of majority of DACs. So I am good with that.
Let's jump into frequency response as that is the other big deal:
We see a bit of frequency dependency but it is outside of our hearing range.
I set the subwoofer output frequency to the lowest and measured this:
Crosstalk is extremely good:
Good performance numbers give way as you go up in higher frequencies in multitone and especially in 19+20 kHz IMD:
Let's see how much power we have:
That's a lot coming out of this little box. We are talking nearly 360 watts total. 8 ohm output is naturally lower:
Edit: as noted, performance does degrade above certain frequency:
My reactive load doesn't like these bridged amps. The issue seems to be in one channel so I left that disconnected and drove only one:
The amplifier is specified down to only 4 ohm but seemed robust enough to even handle 2 ohms, albeit with a good bit of voltage drop. Translating the above into watts we get:
For those of who want to use these amps in mono, you now have that information as well.
There is likelihood of a turn on "pop" but turn off noise is completely eliminated:
Finally, amplifier was essentially ready to go on power up:
Pros & Cons
Pros
- PFFB-Design für niedrige Verzerrung und hohe Leistung
- 300W x2 für passive Lautsprecher
- Balanced XLR/RCA für professionelle Hifi
- 12V Trigger und Zertifizierungen inklusive
Cons
- Klasse D könnte bei Puristen nicht bevorzugt
- Keine integrierten Lautsprecher
- Maximale Leistung über 200W pro Kanal, aber real abhängig
- Aus CN, potenziell längere Lieferzeit
Common Questions
Leistung des Verstärkers?
300Wx2 mit TPA3255 Chip, Klasse D für Hifi.
Anschlüsse?
XLR und RCA Balanced Out, 12V Trigger.
Zertifizierungen?
CE, FCC, RoHS-konform.
Kanäle?
2.0 Stereo mit PFFB Design.
Versand?
Paket: Ja, aus CN (Herkunft), Aiyima A70.
Product information last updated on January 7, 2026
