Toolkitrc q6ac carregador ac 400w/dc 1000w 4ch saída embutida 65w usb a/typec saída, lipo, 1-6s, nimh 1-16s, pcb 1-10s carregador ips

Precautions for using lithium batteries/chargers

① Please stay away from flammable materials when charging and charge in an open and ventilated area!

② Prevent charging at high/low temperatures;

③ Batteries that have already experienced charging rupture should be promptly disposed of in a green manner and cannot be reused;

④ Connecting the positive and negative poles can cause battery disconnection and explosion hazards;

⑤ Any battery damage or injury caused by failure to follow the prompts shall be borne by the user;

⑥ Do not overcharge or overdischarge. Battery damage caused by human overcharging or overdischarge cannot be replaced;

⑦ When using a balanced charger for charging, please make sure to connect it correctly according to the requirements. Improper charging methods may cause damage to the battery and even lead to safety accidents, and the consequences will be borne by the user.

Battery usage warning:

The operating voltage of lithium batteries should not be reduced below 3.6v/s, otherwise it will cause permanent damage or even scrap of the battery

Q6AC four-channel independent output, automatic power distribution, total output power up to 1000W, AC/DC dual mode input, built-in 400W AC power supply, XT90 DC input, power up to 1000W, Magesafe magnetic suction wireless charging, slider design, compatible with XT60/XT30 optional

Equipped with a built-in power supply, it can be directly connected to (110v-220v) mains power, while also providing 4-way charging and wireless charging for mobile phones. It can also be charged with an external battery pack (purchased separately)

Input voltage: AC 100-240V, maximum 100W 5.0A

DC 7.0-30.0v @ Max 50A

Battery type: Lipo LiHV LiFe Lion LTO @ 1-6S

NiMh @ 1-16S Pb @ 1-10S

Balance current: 800mA @ 4.2V

Charging power: 250W @ MAX 15A * 4

Discharge power: 250W @ MAX 15A recycling mode

12w @ 3A normal mode

USBA: 30w or upgrade firmware

USBC: Maximum 65W@20.0V

PD QC PPS AFC FCP SCP PE SFCP

Product size: 220mm * 113mm * 82mm

Product weight: 1120g

Packaging size: 260 * 220 * 120 mm

Packaging weight: 1600g

Product Overview

Q6AC is a four channel balanced charger product with IPS highlighted display screen and more convenient operation of roller encoder.

1. Charging accuracy<0.005V.

2. Balance current 800mA

3. Built in 15W wireless charging.

4. Built in 65W C/30W A fast charging.

5. Lithium battery cut-off voltage can be set (TVC function)

6. Automatic allocation of input power

7. Multi language system, can switch to the desired language at will

8. Simulate the device as a disk, copy the upgrade file to achieve product firmware upgrade

9. Can record 32 commonly used batteries.

10. It can record 3 sets of commonly used power supplies, making it convenient for quick translation selection.

Both the left and right sides can be freely switched between XT60 and XT30Now when purchasing a package, there is no additional charge for increasing the quantity, and the extension board is convenient for inserting and removing batteries of various models. The adapter cable is convenient for customers to handle the charging conversion of different battery plugs, easy and fast, and a good partner for chargers